The ENC24/30SUL is a stainless-steel enclosure with additional wiring room for various components, including a data logger, power supply, larger batteries, and communication and measurement peripherals. It is UL508A listed, with a UL listed NEMA 4X rated enclosure and components. This enclosure, with a backplate with holes for mounting devices, can be ordered with one to four conduit openings or 12 cable entry seals. The ENC24/30SUL is designed for mounting on a tower, building, or other structure, but a user-supplied mount is required. This enclosure is available in two finishes. ENC24/30UL is the painted, mild-steel version, and ENC24/30SUL is the stainless-steel version.
To maintain its NEMA 4X rating, the ENC24/30UL does not come with a standard Campbell Scientific ground lug. Users must bring a ground wire inside the enclosure through a conduit or cable entry seal and then ground it to a ground bar, DIN-rail mounting bracket, or something similar.
The backplate of the ENC24/30SUL is prepunched with half-inch-on-center holes to attach the data logger, power supply, communication device, and measurement and control peripheral.
This enclosure ships with the 7363 enclosure supply kit consisting of desiccant, a humidity indicator card, cable ties, wire tie tabs, putty, grommets, screws, and PVC coupling. Also, Campbell Scientific offers a CS210 Enclosure Humidity Sensor to monitor relative humidity inside the enclosure. (See Ordering Info on the web page.)
|Construction||Formed, 14 gauge, 304 stainless steel with door gasket and stainless-steel hinges|
|Enclosure Classification||NEMA Type 3R, 4X, 12, and 13|
|Dimensions||61 x 76 x 20 cm (24 x 30 x 8 in.)|
|Weight||21 kg (46 lb)|
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.