Get Started.

Unpack your shipping boxes.

The CR1000X ships with:

  • USB Cable
  • Screwdriver
  • Type T Thermocouple
  • Screws and Grommets for mounting (4 each)

Install your software.

The CR1000X is compatible with LoggerNet, PC400, and PC200W (versions 4.5 or higher).



View CR1000X Page

CR1000X Support Resources

  1. View Data Tutorial
  2. Collect Data Tutorial
  3. IP Networking and Data Loggers Part 1 (8:34)
  4. Fundamentals of CRBasic Programming Part 4: Programming for Control with Operators and Logical Expressions. (9:05)
  5. Fundamentals of CRBasic Programming Part 5: Conditional Tables (10:51)
  6. IP Networking and Data Loggers Part 2 (9:51)
  7. CR1000X Getting Started
  8. New CR1000X Datalogger (2:26)
  9. Datalogger Programming
  10. Connect Window Tutorial
  11. CR1000X Datalogger Getting Started | Overview (Part 1) (1:52)
  12. Using a Multiplexer (8:27)
  13. Ethernet over USB (2:11)
  14. Toolbox for Installation and Maintenance (2:21)
  15. Campbell Scientific Data Logger Expansion (8:53)
  16. CR1000X Datalogger Getting Started | Communicate (Part 2) (5:24)
  17. CRBasic in the Real World Part 4: Offsets (7:24)
  18. CR1000X Datalogger Getting Started | Program (Part 3) (5:49)
  19. CRBasic in the Real World Part 2: Triggering Real-Time Measurements During a Site Visit (10:41)
  20. CR1000X Datalogger Getting Started | Data (Part 4) (3:47)
  21. Pipeline and Sequential Modes (10:04)
  22. Double-Precision Calculations (5:50)
  23. Fundamentals of CRBasic Programming Part 6: Loops (9:02)
  24. Troubleshooting Resistance-Based Sensors (18:23)
  25. CRBasic in the Real World Part 1: Adding a Water Level Measurement (8:28)
  26. CRBasic in the Real World Part 3: Subroutines (6:31)
  27. Fundamentals of CRBasic Programming Part 7:Determine If External Memory is Required/Intro to MicroSD (9:19)
  28. Fundamentals of CRBasic Programming Part 8: Deploy, Monitor, and Swap MicroSD Cards in the Field (7:41)
  29. Fundamentals of CRBasic Programming Part 9: Retrieving Data from a MicroSD Card (5:51)
  30. Multiplexer Programming with a CR1000 Datalogger (6:09)
  31. LoggerNet Software | Changing Variables (2:33)
  32. Troubleshooting Voltage Output Sensors (7:42)
  33. Power Budgeting (4:07)
  34. SDI-12 Sensors | Transparent Mode (7:13)
  35. Sending an OS to a Local Datalogger (Part 1) (5:28)
  36. SDI-12 Sensors | Watch or Sniffer Mode (3:25)
  37. Sending an OS to a Remote Datalogger (Part 2) (5:10)
  38. Wiring a Datalogger to a Multiplexer (7:18)
  39. LoggerLink Software | An Introduction (12:11)
  40. LoggerNet Software | Network Planner (4:04)
  41. Fundamentals of CRBasic Programming Part 1: Variables (13:30)
  42. Fundamentals of CRBasic Programming Part 2: Tables (8:53)
  43. Fundamentals of CRBasic Programming Part 3: Writing a Complete Program (14:51)
  44. CRBasic in the Real World Part 5: Changing the Sensor Used in a Program and Program Versioning (5:42)
  45. Understanding the Importance of Grounding (5:41)
  46. Replacing the CR1000X Lithium Battery (5:58)
  47. Using RTMC (2023) (10:41)
  48. Using RTMC Pro (5:44)
  49. Using RTMC Pro to Create a Report and Hotspot (6:45)
  50. Basic Troubleshooting 1: Measuring Data Logger Output Voltage With a Multimeter (3:54)
  51. Basic Troubleshooting 2: Checking Continuity (2:15)
  52. Basic Troubleshooting 3: Measuring Current Drain (4:12)
  53. Introduction to the CR1000KD (2:44)
  54. Troubleshooting with the CR1000KD (7:12)
  55. CRBasic Functions (6:23)
  56. Backing Up and Restoring Data Logger Settings Files Using Device Configuration (4:07)
  57. Creating Custom Menus in CRBasic for a Data Logger Display (8:28)
  58. Wiring Diagrams for Data Logger Programs Part 1: Using Short Cut for Windows (5:28)
  59. Creating a Short Cut Wiring Diagram for Sensor Not in Short Cut (5:50)
  60. Analyzing a CRBasic Program to Deduce Sensor Wiring (7:13)
  61. Documenting Data Logger Wiring Using an Excel Template (5:41)