COMING SOON ›
This product can't be ordered yet, but will be available soon.
CPEC306
 
CPEC306 Expandable Closed-Path Eddy-Covariance System with EC155 and Pump Module
 
Datalogger Option
-DW -DW Wired for CR6
-6NA -6NA w/CR6-NA
-WIFI -WIFI w/CR6-WIFI
-RF451 -RF451 w/CR6-RF451
CDM-A116 Option
-NAM -NAM w/o CDM-A116
-AM -AM w/CDM-A116
Keyboard Option
-NK -NK No Keyboard/Display
-KD -KD w/Keyboard/Display
Sonic Sensor Option
-NS -NS No Sonic Sensor
-SS -SS Sonic Sensor
-SS Sonic Carrying Case Opt
  -NC -NC No Sonic Case
  -SC -SC Sonic Carrying Case
 
EC155 Carrying Case Opt
-NG -NG No EC155 Case
-GC -GC EC155 Carrying Case
System Mounting Options
-NM -NM No Enclosure Mounting
-MM -MM Tripod Mast Mounting
-LM -LM CM106 Leg Mounting
-TM -TM Tower Mounting
-PM -PM Pole Mounting, 4-10in

Add to your Quote List


Product Details
Typically Ships Within 21 - 28 Days
Restockable Yes
Warranty 1 year
Compliance

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.


Common Accessories

CABLEPCBL-L
 
CABLEPCBL-L 2-Conductor 16 AWG Power Cable
 
The CABLEPCBL-L is a 16 AWG, two-conductor cable with a Santoprene jacket. The conductors are stripped and tinned. This generic cable is used to power remote peripherals.
CABLEPCBL-L Options - show details
-L m per cable

Allowed values: 5-305 m, increments of 5 m

Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
CABLE4CBL-L
 
CABLE4CBL-L 4-Conductor 22 AWG Cable with Drain
 
The CABLE4CBL-L is a 22-AWG, four-conductor cable with a Santoprene jacket and an aluminum Mylar shield. It is used for SDM communication. The conductors are stripped and tinned and have red, black, green, and white insulation colors.
CABLE4CBL-L Options - show details
-L m per cable

Allowed values: 5-305 m, increments of 5 m

Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
Choose this option if you are using this cable with a pre-wired enclosure.
26504-L
 
26504-L CPEC200/300 Pump Tubing Assembly, 0.375 OD
 
The 26504-L is one option for the pump module. The 26504-L is a pre-swaged 3/8 in. OD pump tubing assembly used for connecting the EC155 CO2/H2O Closed-Path Gas Analzyer to the pump module with a recommended maximum distance of 50 ft. For distances longer than 50 ft between the EC155 and the pump module (up to 500 ft), Campbell Scientific recommends using a larger ½ in. OD tubing assembly (26503-L).
Tubing Length - show details
-L m per assembly

Allowed values: 5-15 m, increments of 5 m

26503-L
 
26503-L CPEC200/300 Pump Tubing Assembly, 0.500 OD
 
The 26503-L is one option for the pump module. The 26503-L is a pre-swaged ½ in. OD pump tubing assembly used for connecting the EC155 CO2/H2O Closed-Path Gas Analyzer to the pump module with a recommended distance of 50 to 500 ft. For distances shorter than 50 ft between the EC155 and the pump module, Campbell Scientific recommends using a smaller 3/8 in. tubing assembly (26504-L).
Tubing Length - show details
-L m per assembly

Allowed values: 5-150 m, increments of 5 m

21823-L
 
21823-L Calibration Gas Tubing Assembly
 
Campbell Scientific recommends using one 21823 with the system. The Tee Connection option is not needed. The 21823 provides a calibration gas tubing assembly. Tubing length is user specified.
21823-L Options - show details
-L m per Tubing Assembly

Allowed values: 5-150 m, increments of 5 m

Tee Connection Option
-NT -NT No Tee Connection
-TT -TT Tee Connection
27158
 
Campbell Scientific recommends using at least one microSD card with the system, and the 27158 is one option. The 27158 is a 2 GB microSD flash-memory card designed for use in harsh conditions often presented by environmental and industrial applications.
27159
 
27159 16 GB microSD Flash SLC Memory Card
 
Campbell Scientific recommends using at least one microSD card with the system, and the 27159 is one option. The 27159 is a 16 GB microSD flash-memory card. This card is designed for use in harsh conditions often presented by environmental and industrial applications. The card uses single-level cell (SLC) memory, which aids in its ability to operate over wide temperature ranges, consume less power, and provide a reliable data-storage medium through more read-write cycles.
 
17752 USB Memory Card Reader / Writer, 3ft Cable
 
The 17752 is a multiple-slot, high-speed reader/writer that allows a computer to read a memory card. When used with Campbell Scientific equipment, the 17752 typically reads data stored on CompactFlash or microSD cards, but it can read many different types of memory cards. The 17752 connects to the computer's USB port.

Other Accessories

EasyFlux WebS
 
EasyFlux™ Web Self-Hosted is a web-based software tool for monitoring CR6- and CR3000-based Campbell Scientific, Inc. eddy-covariance systems. EasyFlux™ Web Self-Hosted is a user-installed version of EasyFlux™ Web that allows users the ability to install on their own server and control updates of the software themselves.
EasyFlux WebH
 
EasyFlux WebH EasyFlux Web Software, Campbell Scientific-Hosted
 
EasyFlux™ Web CSI-Hosted is a web-based software tool for monitoring CR6- and CR3000-based Campbell Scientific, Inc., eddy-covariance systems. EasyFlux™ Web CSI-Hosted is hosted on Campbell Scientific's own Microsoft Azure server, which allows for automatic updates and maintenance of the software. After users create an account, they are given their own IP address to allow them to easily connect to their data from an Internet-connected device. Monitoring a network of eddy-covariance systems is made easy with real-time data monitoring, customizable alerts, and data download capabilities. EasyFlux™ Web is compatible with open- and closed-path eddy-covariance systems.
EasyFlux PC
 
EasyFlux™ PC is a free computer program that processes high frequency time series data, collected using a Campbell Scientific eddy-covariance flux system, into fluxes following community accepted practices. Fully corrected fluxes of CO2, latent heat (H2O), sensible heat, and momentum are available, in generic, AmeriFlux, and GHG-Europe ASCII formats.
EasyFlux DL
 
EasyFlux™ DL is a free CRBasic program that enables a datalogger to report fully corrected fluxes of CO2, latent heat (H2O), sensible heat, and momentum from a Campbell Scientific open-path eddy-covariance (EC) system. Final fluxes are processed from raw high frequency time series data by applying commonly used corrections found in scientific literature.

Replacement Parts

33384
 
The 33384 contains two desiccant/scrubber bottles utilizing a non-hazardous molecular sieve. Each bottle contains necessary chemicals and membrane filters for scrubbing CO2 and water vapor from the gas analyzer housing. Empty chemical bottles should be disposed of according to local and federal regulations. SDS (Safety Data Sheet) forms for the chemicals are included in the EC155 manual.
28902
 
The sonic wick spares kit is used to replace wicks on a CSAT3, CSAT3A, or IRGASON. It includes three top wicks, three bottom wicks, an installation tool, and some adhesive.
34007
 
This replacement part is for any lost or broken feedthrough cap that comes with the CPEC306. The 34007 includes the cap and a screw to secure the cap to the CPEC306 main enclosure.
4905
 
The 4905 is replacement desiccant for the enclosures in this system.
28878
 
The 28878 is a replacement humidity indicator card. It provides a visual reference of humidity level inside the enclosure.
30028
 
The 30028 fits inside a CR6-series datalogger. This lithium battery powers the clock and SRAM when external battery power, a charging source, or a USB power source is not connected. The 30028 is a 3.6 Vdc, 2.4 Ah, AA size cell. The 30028 needs to be periodically replaced.
8125
 
The 8125 is a small, flat-bladed screwdriver that is extremely useful for opening the guillotine terminals on our dataloggers and measurement control devices.
26563
 
The cable is 4.5 m long. It may be purchased to replace a lost or damaged cable.
27555
 
27555 USB 2.0 Cable, Type A Male to Micro B Male, 6/6.5 ft
 
The 27555 is a USB Type A to Micro B, male-to-male cable, 6 to 6.5 ft long. It connects devices using the Micro B interface to a USB port on a computer.
32203
 
The 32203 is a replacement in-line filter kit for the EC155 heated vortex. The kit includes a 25 µm filter and new ¼ in. Swagelok® nuts.
560
 
The 560 screw is used to attach a backplate to the inside of an enclosure.
27153
 
The 27153 replaces a damaged EC155 carrying case and includes a foam insert. The carrying case may also be ordered as a separate item if it wasn't ordered initially with the EC155.
28640
 
The 28640 universal terminal connector is shipped attached to our CR6-series dataloggers. This lockable connector provides screw terminals for connecting digital or analog sensor or control wires to the CR6.
25600
 
The 25600 control terminal connector is shipped attached to our CR6-series dataloggers. This lockable connector provides screw terminals for connecting digital sensor, general I/O, and control wires to the CR6.
27651
 
The 27651 power connector is shipped attached to our CR6-series dataloggers. This green, removable connector provides screw terminals for connecting the wires of a 12 V battery and/or a 16 to 32 Vdc charging source, such as a power converter or solar panel, to the CR6.
 
The 26570 is required to mount the EC155 closed-path gas analyzer and the CSAT3A sonic anemometer head to a mounting structure.
16005
 
16005 2.4 GHz 0 dBd Omnidirectional 1/2 Wave Whip Antenna
 
The 16005 is a unity gain (0 dBd), 1/2 wave whip, omnidrectional antenna that features an articulating knuckle joint for easy orientation, weatherized jacket for outdoor applications, and internal counterpoise for ground plane independence.
27008
 
The EC155 Foam Case Set is typically ordered as a replacement part for the foam set that came with the original EC155. The foam set is designed to be used in either the EC155 carrying case or a cardboard box. This foam set protects the EC155 and its parts when travelling with the instrument.
 
The EC155 Heated Vortex Intake is designed to separate particulates from the sample flow and reduce condensation. This newer vortex intake replaces the old vortex intake design that was susceptible to cracking near the intake. While the cracking on old vortex intakes is just cosmetic and does not affect measurements, users may want to replace their old intake with this new one.

Note: EC155 units that were shipped after March 29, 2018, have the new vortex intake already. The 31693 is intended for customers with an older EC155 unit.

Services

 
The 27332 provides a recalibration with zero and span. When drift between zero and span checks seems unstable, or when diagnostic output indicates a problem, the instrument should be sent in for a full factory calibration with zero and span. An RMA is required.
 
The 27333 allows customers to send their EC155 or CPEC306 to Campbell Scientific and have Campbell Scientific perform a zero and span; an RMA (Returned Material Authorization) is required. The zero and span should be done when ambient conditions change significantly (i.e., seasonally).