All FAQs (1869 total: showing 1761-1780)
- What is the power consumption (mA) of the 05103-L, 05103-45-L, 05305-L, and 05106-L anemometers?
- What is the procedure for orienting a WindSonic-L to the cardinal directions, so that the wind direction readings are correct?
- What is the voltage output range for the 21X?
- If the 21X was turned off before the data was downloaded using PC208W, what can be done?
- Do the 21X dataloggers have a built-in security code that might be activated under certain conditions when upgrading the program?
- Can the CR5000 store data with a rate of 1000 Hz?
- What happens to a 21X program when the batteries fail?
- Is the 03101-L capable of delivering a 0 to 5 Vdc square wave output for the wind speed?
- How do the 014A-L 3-Cup Anemometer and 03101-L Wind Sentry Anemometer compare?
- Using a 229-L with a CR1000, can the system be programmed to read the equilibrium soil temperature before excitation for a matric potential measurement?
- Do heater resistance values of 37 to 48 ohm indicate a problem with the 229-L, or are those values within the normal range?
- Is there a limit to how much memory the CR5000 can access/use through the PCMCIA interface?
- Is it possible to transfer data from PC400 directly to a database such as Oracle (possibly through ODBC on Windows)?
- What is needed to upgrade PC208 software to PC400 software?
- What might cause the 014A-L to miss data, provide readings of 0 constant wind speed, and show various readings of gust speed?
- Is the CC640 a real-time camera?
- Is it possible to watch real-time online images using the CC640 and a suitable data logger? How it is possible to retrieve data from the camera, as there is only one RS-232 terminal on the data logger, which is usually used for a GPRS device?
- Can a digital camera be used with an RF network to transmit images back to the office using LoggerNet?
- Is there an existing port on the CR10X that can house a RS-232 one-wire interface device?
- Is there a minimum 12-channel data logger available that can send data to an Internet server by GPRS?
Previous
Next