Subscribe

Subscribe to receive email notifications when new videos are posted.

Displaying 1 to 10 of 18
Sort by
 

CR300 Quickstart Part 4 - Send a program, collect and view data (Russian)

Use LoggerNet's Connect Screen to send a program, view real-time measurements in the Table Monitor, collect data, and display collected...

(3:48) Posted: 12/21/2018


CR300 Quickstart Part 3 - Create a program and connect sensors (Russian)

Create a CR300 program using Short Cut, Campbell Scientific's program generator. Wire your sensor accordingly. Follow along with the QuickStart...

(5:34) Posted: 12/21/2018


CR6 Series Wi-Fi QuickStart

Quickly set up Wi-Fi communications with a CR6-series datalogger. This tutorial will get you started with examples to either create...

Posted: 11/14/2017


New CR1000X Datalogger

The CR1000X Measurement and Control Datalogger provides an embedded, browser-based user interface for quick and easy data and system interrogation...

(2:26) Posted: 8/3/2017


Datalogger Programming

Start your datalogger program with Short Cut. Programs generated by Short Cut can be edited and enhanced in the CRBasic...

Posted: 8/3/2017


Data Loggers | An Overview

Because accurate measurement data is vital to your educated decision making, Campbell Scientific manufactures a complete line of data loggers...

(1:11) Posted: 5/22/2017


CR300 Series Wi-Fi QuickStart

Quickly set up Wi-Fi communications with a CR300-series datalogger. This tutorial will get you started with examples to either create...

Posted: 2/3/2017


EZSetup Ethernet Connection

Use the EZSetup wizard to set up IP communication between the computer and datalogger.

(2:02) Posted: 1/10/2017


Datalogger Ethernet Configuration

Use the Device Configuration Utility to enter the datalogger static IP Address, Subnet Mask, and IP Gateway address. (A static...

(2:54) Posted: 1/10/2017


Connect Window Tutorial

LoggerNet Connect gives you a dashboard view of what's happening with each datalogger in your network. PC400 and PC200W have...

Posted: 8/26/2016