The RAD06 uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. It also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2m/s (~4.5 mph)), providing a better measurement.
Note: In the image, the RAD06 is mounted to a crossarm with a thermistor.
The RAD06 houses one 107, 108, 109, CS215, or HMP60 probe. The probe fits in the bottom of the shield and is held in place with a foam-lined gland.
The RAD06 includes a 2 in. U-bolt with a plastic V-block. The U-bolt is placed in the holes on the side of the bracket for attachment to a mast or vertical pole. The U-bolt is placed in the holes on the bottom of the bracket for attachment to a crossarm.
|Construction||UV-stabilized white thermoplastic plates, aluminum mounting bracket, white powder-coated stainless-steel U-bolt clamp|
|Plate Diameter||12.3 cm (4.84 in.)|
|Height||14.2 cm (5.59 in.)|
|Weight||870 g (1.92 lb)|
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
The RAD06 attaches to a crossarm, mast, or user-supplied pipe with a 1.0 to 2.1 in. OD.