Hello.
I have a modem with default settings. Modem is based on Telit GL868-DUAL V3 module
AT+IPR=9600
ATS0=1
AT&C1
AT&D0
AT+CBST=71,0,1
ATE0
AT&K0
AT&W
CR1000xe is configured to PPP via RS232 port.
user and password are empty
PPP Dial -> AT+CGDCONT=1,"IP","internet";ATD*99***1#
PPP Dial Response -> CONNECT
Logger doesn't send AT commands to initialize connection, instead it sends
14:24:02.784 T A
14:24:03.162 T A
14:24:06.162 T A
14:24:15.762 T A
14:24:18.762 T A
14:24:21.762 T A
14:24:24.762 T A
14:24:27.762 T A
14:24:30.762 T A
14:24:34.962 T +++
14:24:36.162 T ATH
14:24:36.182 R
14:24:36.182 R OK
PPP Network Status just cycles through
Dialing START -> Dialing Failed
OS version is 8.2.1
Why logger doesn’t send AT+CGDCONT and ATD commans? It is as if it doesn’t respect PPP dial settings.
EDIT: logger is CR1000Xe