Toggle navigation
Products
Solutions
Support
About
Home
Products
Solutions
Support
About
Quote List
Contact
Regional Websites
Regional Websites
Africa
Australia
Brasil
Canada
Centro Caribe
Deutschland
España
Europe
France
India
Japan
United States
ภาษาไทย
中国
Country Directory
Log In
FAQs
Frequently asked questions about our products and solutions
Ask a Question
Ask a Question
How can four sensors that produce an RS-232 signal be connected to a CR5000?
Use four SDM-SIO1s or a single SDM-SIO4.
This was helpful
FAQs Home
Search
Similar FAQs
When trying to start LoggerNet, what might cause the "Unable to start program because the Campbell Scientific communications server is already running" message?
Can Campbell Scientific data loggers be used with a telemetry system to remotely download data, check parameters, etc.?
Using LabVIEW, can communication be established with a data logger?
The CR1000/CR3000 wiring panel shows four serial I/O ports on C1 to C8. Do these serial I/O ports provide the same functionality as the SDM-SIO4 module did on a CR10X or CR23X datalogger?
If a data logger has not been used in a while and the internal battery is low, will the battery recharge if the data logger is connected to a power supply? Or does the battery need to be replaced?
What criteria should be used to select an antenna?
What do “serial port open failed” and “permission denied” error messages mean?