FAQs Frequently asked questions about our products and solutions

Where is there a picture with part numbers for the fuel moisture sensor, fuel temperature stick, temperature probe, and mounting stake?

For descriptions and illustrations (with part numbers) of the various instruments used in measuring fuel temperature and moisture, see the "Remote Measurements" brochure.

This was helpful

FAQs Home

Similar FAQs

How is communication achieved through a datalogger CS I/O port?
If the sonic temperature is reading a couple degrees different from the IRGASON^® or EC150 temperature probe, is that a problem?
When trying to start LoggerNet, what might cause the "Unable to start program because the Campbell Scientific communications server is already running" message?
If the cable attached to a sensor is too short, can more cable be spliced to the existing cable to make it longer?
What type of field check can be done on a temperature sensor or a temperature and relative humidity sensor to determine if it is within the range of specified accuracy or if it requires calibration?
Is there a way to convert an Edlog program file to a CRBasic program file?
How can measurements be made using a 107, 108, or 109 temperature sensor/probe with a measurement device other than a Campbell Scientific data logger?