All FAQs (1639 total: showing 601-620)
- After upgrading to the newest LoggerNet version, will the new software run old programs?
- When an upgrade from one version of LoggerNet to another is purchased, can both versions be used at the same time by the same user?
- If the LoggerNet upgrade is purchased for the current version license, how does the upgrade work? What is the process for upgrading?
- What is the difference between a patch and an upgrade?
- How can the TCP/IP stack in a CR1000 or CR3000 be used?
- What might cause connection issues between a CR1000 or CR3000 and an NL120, resulting in lost data?
- If several CR1000 or CR3000 dataloggers only have a serial interface that is used as the data highway to a SCADA network, can an NL120 be added without interfering with the current serial port data communications system?
- To communicate with a CR1000 or CR3000 by TCP/IP using an NL120 or NL240, is it necessary for the data logger to have a fixed IP address?
- If a CR1000 or CR3000 is connected to an NL120 and it has been assigned an IP address, can configuration changes be made on the data logger using only the IP connection?
- If LoggerNet does not list the NL120, is that OK?
- If a CR1000 or CR3000 is paired with an NL120 for remote access, can a second data logger be connected to the first data logger and the NL120 pull data from both data loggers?
- Can a Wi-Fi device be plugged into the NL120 so that data logger communication can occur using a Wi-Fi service?
- Does an NL120 work with a wireless Ethernet bridge?
- Can an NL120 be used to connect multiple CR1000 or CR3000 dataloggers to the Internet?
- Can a COM port and an NL120 be used together?
- Can the NL120 be used to produce analog voltages?
- Can a PDA with PConnectCE be used to set values?
- Does PConnectCE allow a user to set up the same type of communication links as with LoggerNet?
- After installing PConnectCE on a PDA, how is the software accessed?
- If a Windows Mobile device and a PC are synchronized, does PConnectCE have to be installed on both the Windows Mobile device and the PC?
Previous
Next