FAQs Frequently asked questions about our products and solutions

Ask a Question Ask a Question

All FAQs (1869 total: showing 1801-1820)

What is needed to write a simple program that will read two analog channels (0 to 10 Vdc)?
When dialing up the 21X, the barometric pressure data is displayed in real time. When the data is collected via either dial-up or a storage module, the barometric data are all zeros. Why does this happen?
Can a point-multipoint network be built using RF401 radios with a base and three remote terminals, a data logger at each terminal, a COM210 modem, and a remote PC with LoggerNet software?
Does Baler 2.2 work with a CR800? Is a more recent version of Baler needed?
In what format does the Baler Client Software save the data? Are there format options?
Is there a patch for the current version of Baler?
When trying to start LoggerNet, what might cause the "Unable to start program because the Campbell Scientific communications server is already running" message?
After installing an upgrade to the current version of LoggerNet, why does the Toolbar no longer show all the buttons?
Why is the battery in the BP12 and BP24 assembly taller than the bracket?
Is there a meter that can measure the atmospheric vertical electric field without connecting to the Earth?
What should be done if a compiling error message is received after inserting a new PC card into the CR5000?
Can a non-standard port for telnet access to the NL100 be specified in OS 7?
Which version of the OPC DA specification does the PC-OPC Server work with?
What are the CR9000X download instructions for an operating system upgrade?
Is there a sample program available for the CR1000 for eddy-covariance applications?
Where is the Transformer tool?
What is the stated accuracy for the thermocouple (temperature measurement) in a 229-L Water Matric Potential Sensor?
Can the CR10X communicate easily with a Wonderware SCADA system for data display?
How is the terminal emulator used to set up a COM200 or COM210 using LoggerNet?
Where is the manual for SCWin?

Previous Next