All FAQs (1869 total: showing 1721-1740)
- How many 4WPB100s are needed to measure the internal PRT in an NR01-L, CNR4-L, or CNR1-L 4-way net radiometer?
- What's new in VisualWeather 3.1?
- Which protocol does the CR500 use to communicate with a modem?
- If a CR500 is disconnected from its power source, does the data logger keep the stored data in the flash memory, or does it erase the data definitively?
- Can the CR510 manual be used to answer questions regarding a CR500?
- How is the oxygen level in water controlled?
- Which system would be most economical to monitor the water quality in fish ponds and prawn ponds?
- Can the aquaculture systems be used for wastewater applications?
- Can a SCADA system be put together using a CR10X, LoggerNet software, and RF401 radios?
- If a DOS application requires bidirectional serial wireless communication to a nonintelligent data terminal, will a pair of RF401s work?
- If an RF401 is used with a CR10X datalogger to communicate with the RF401 on the computer side, can four different data loggers with RF401 be used on the computer side, thus taking data from four different data loggers and plotting at the same time?
- What is the typical range for the RF411?
- Is there a shelf-life for the CS511-L Dissolved Oxygen Probe?
- Can the CS511-L be used to measure dissolved oxygen in a soil medium?
- Is a reference table sent with each CS511-L?
- Can the CS511-L be completely immersed?
- Is there a connection where the cable can come out of the CS511-L?
- Using the BMP5 Direct SDK, how can data be queried from a data logger starting at time1 and continuing to time2?
- What might cause a CR23X to lock up and display an "E08 Watchdog Reset" error?
- Is it possible to use the BMP5 Direct SDK to connect to a data logger via a modem?
Previous
Next