CRVW3-NE 3-Channel Vibrating-Wire Datalogger without Enclosure

The CRVW3-NE is a 3-channel vibrating-wire data logger. It is designed to be an independent data logger, or a reliable component in a larger data acquisition system. The CRVW3-NE has multiple communication options and a power regulator for easy solar panel and battery connection. The CRVW3-NE and the CRVW3 are similar products that share the same electronic components. The main difference between them is that the... Learn More


EasyFlux PC Eddy-Covariance Post-Processing PC Software

EasyFlux™ PC is a free computer program that processes high frequency time series data, collected using a Campbell Scientific eddy-covariance flux system, into fluxes following community accepted practices. Fully corrected fluxes of CO2, latent heat (H2O), sensible heat, and momentum are available, in generic, AmeriFlux, and GHG-Europe ASCII formats. Learn More


RV50X Industrial 4G LTE Cellular Gateway

The RV50X is an industrial 4G LTE cellular gateway that provides serial and Ethernet connectivity to numerous cellular networks. The RV50X is capable of LTE, CDMA/EV-DO, and GSM/GPRS/EDGE/WCDMA networking and is carrier-approved in North America for Verizon, AT&T, T-Mobile USA, Rogers, Bell, and Telus. The networking and carrier used by the RV50X is determined by the active SIM card(s) inserted into the device. The RV50X... Learn More


CS475A-L Radar Water-Level Sensor, 114.8 ft Maximum Distance

The CS475A radar-ranging sensor monitors the water level of rivers, lakes, tidal seas, and reservoirs. The sensor is ideal for areas where submersed sensors can be damaged due to corrosion, contamination, flood-related debris, lightning, or vandalism. It emits short microwave pulses and then measures the elapsed time between the emission and return of the pulses. The elapsed time measurement is used to calculate the distance... Learn More


CM260 Adjustable Solar Sensor Mounting Kit for ATI Torque Tube

The CM260 is a fully adjustable pyranometer mounting kit. It has been specifically designed for the limited space near the end cap of the ATI Torque Tube, and it can be used with any other 12.7 cm (5 in.) diameter tube. The CM260 can be ordered with a standard top plate (same as CM255LS) for use with most common pyranometers or with a top plate designed... Learn More


CS240 PT1000 Class A, Back of Module Temperature Sensor

The CS240 is a surface-mountable PT1000 Class A RTD in a ruggedized form factor commonly used in solar energy applications to measure back-of-module temperature with the highest level of accuracy. To withstand the harsh treatment commonly seen in MET station installations, the RTD is safely housed inside a specially designed self-adhesive aluminium disk. Learn More


CR1000X Measurement and Control Data Logger

The CR1000X is our flagship data logger that provides measurement and control for a wide variety of applications. Its reliability and ruggedness make it an excellent choice for remote environmental applications, including weather stations, mesonet systems, wind profiling, air quality monitoring, hydrological systems, water quality monitoring, and hydrometeorological stations. The CR1000X is a low-powered device that measures sensors, drives direct communication and telecommunications, analyzes data, controls... Learn More


ENC8/10 Weather-Resistant Enclosure, 8 x 10 inches (203 x 254mm)

The ENC8/10 is a weather-resistant enclosure that is 8 inches wide and 10 inches tall (203 x 254mm). It is the smallest of our standard enclosures, yet it is extra deep with a depth of 6 inches (152mm). This enclosure is suitable for use with CR300-series or CR200X-series data loggers. The ENC8/10 can house one of these dataloggers and a small power supply. Alternatively, this... Learn More


LI200RX-L Pyranometer with Fixed Calibration

The LI200RX pyranometer measures both sun and sky solar radiation with a silicon photovoltaic detector mounted in a cosine-corrected head. The cable contains circuitry that standardizes sensor calibration, allowing complete sensors and cabling to be swapped out in the field without having to change the datalogger programming.  This pyranometer connects directly to Campbell Scientific dataloggers and is ideal for agricultural and meteorological applications. The LI200RX is calibrated for... Learn More


EasyFlux DL Eddy-Covariance Datalogger Program

EasyFlux™ DL is a free CRBasic program that enables a data logger to report fully corrected fluxes of CO2, latent heat (H2O), sensible heat, and momentum from a Campbell Scientific open-path eddy-covariance (EC) system. Final fluxes are processed from raw high frequency time series data by applying commonly used corrections found in scientific literature. In the past, Campbell Scientific's data logger EC programs roughly estimated fluxes, and... Learn More


CS320 Digital Thermopile Pyranometer

The CS320 is a digital thermopile pyranometer that measures broad-spectrum short-wave radiation and communicates over the simple SDI-12 protocol to the datalogger. This sensor design eliminates measurement error and programming errors that can adversely affect data quality. This pyranometer has been designed to improve the global solar radiation measurement significantly (even under cloudy conditions) without adding substantial cost. The CS320 is suitable for applications ranging from... Learn More


LI200R-L Pyranometer

The LI200R, manufactured by LI-COR, is a pyranometer that measures both sun and sky solar radiation with a silicon photovoltaic detector mounted in a cosine-corrected head. It connects directly to Campbell Scientific dataloggers and is ideal for agricultural and meteorological applications. The LI200R is calibrated for natural light and should not be used under artificial light or under plant canopy. Learn More


NL241 Wireless Network Link Interface

The NL241 provides Wi-Fi connectivity to data loggers and peripheral devices over standard 802.11b/g/n networks.  The NL241 is a wide-operating-temperature and low-power-consumption device, making it ideal for providing Wi-Fi client and access point functionality in demanding and remote applications. The wireless access point feature allows any Wi-Fi device to connect, including your PC, phone, tablet, or even another NL241 or NL240. It can be always on, cycled... Learn More


CR300 Datalogger

The CR300 is a multi-purpose, compact measurement and control data logger. This small, low-cost, high-value datalogger offers fast communications, low power requirements, built-in USB, and excellent analog input accuracy and resolution. The CR300 can measure most hydrological, meteorological, environmental, and industrial sensors. It concentrates data, makes it available over varied networks, and delivers it using your preferred protocol. It also performs automated on-site or remote... Learn More


VWANALYZER Vibrating-Wire Analyzer

The Vibrating-Wire Analyzer (VWA) is the most innovative vibrating-wire field reader available. Field ready to quickly measure a sensor, save data, and communicate results with custom PDF reports and spreadsheet output. VWA measurements are geolocated with an integrated GPS, allowing the device to verify and provide guidance to sensor locations. The VWA uses spectral-analysis technology (VSPECT™) to provide the best vibrating-wire measurement possible while filtering... Learn More


28764 SDM8X50 Enclosure

The 28764 is a weather-resistant enclosure that is 10 inches wide and 12 inches tall with two conduits for cable entry. This enclosure houses and protects the SDM8X50 TDR multiplexer. When purchased with the –E option, the SDM8X50 ships with this enclosure and an enclosure supply kit. Learn More


CM265 Adjustable Solar Sensor Mounting Kit for NEXTracker Torque Tube

The CM265 is a fully adjustable pyranometer mounting kit. It has been specifically designed for the limited space near the end cap of the NEXTracker Torque Tube, and it can be used with any other 12.7 cm (5 in.) diameter tube. The CM265 can be ordered with a standard top plate (same as CM255LS) for use with most common pyranometers or with a top plate... Learn More


EE181-L Air Temperature and Relative Humidity Probe

The EE181 is a rugged, accurate air temperature and relative humidity (RH) probe that is ideal for long-term, unattended applications. It includes a proprietary coating on the RH element that increases the life of the element and protects it from dirt, dust, salt, or other contaminants. A 1000 Ω PRT measures air temperature for the -40° to +60°C range. For optimum results, the EE181 should be... Learn More


CRVW3 3-Channel Vibrating-Wire Datalogger

The CRVW3 is a self-contained, low-cost, 3-channel VSPECT™ vibrating-wire data logger. It is designed to be an independent data logger or a reliable component in a larger data acquisition system. Arriving field-ready from the factory with power, communications, and an enclosure, the CRVW3 is built for your monitoring needs. Learn More


A300 Power and Signal Converter

The A300 is a logic-level shifter and voltage converter. It provides two level-shifting channels: the first converting 5 V to 3.3 V, and the second converting 3.3 V to 5 V. Additionally, the A300 provides a regulated 3.3 V power output. The A300 is commonly used when connecting the pulse-per-second (PPS) output of a GPS16X-HVS to a CR800-series, CR1000, or CR3000 datalogger. In 2014, Garmin changed... Learn More


TDR200 Time-Domain Reflectometer

The TDR200 Time-Domain Reflectometer is the core of the Campbell Scientific time-domain reflectometry (TDR) system. TDR systems accurately determine soil volumetric water content, soil bulk electrical conductivity, rock mass deformation, or a user-specific time-domain measurement. One Campbell Scientific datalogger can control multiple TDR200 reflectometers. Learn More


CM255LS Adjustable-Angle Solar Sensor Mounting Stand with Leveling Screws

The process of securely mounting and accurately leveling a pyranometer to a mounting bracket has traditionally been very difficult. The balance between tightly securing the sensor to the mounting bracket while perfectly leveling the sensor requires great time, skill, and fortitude. Without a secure fit, the sensor’s position will shift, and the sensor’s level will potentially be lost. The process is made even more difficult... Learn More


30626 3/4 in. IPS or GPS Antenna Mounting Stand

The 30626 is an antenna mounting bracket designed for antennas with 3/4 in. IPS mounting threads. It is most commonly used with the 17992 GPS antenna or the 30741 Iridium antenna. Because the 30626 is made from steel, it is suitable for mounting small magnetic-mount antennas typically seen with GPS patch antennas. Learn More


CS120A Atmospheric Visibility Sensor

The CS120A uses tried-and-tested, infrared forward-scatter technology, and it uses the proven 42° scatter angle to report meteorological observable range (MOR) for fog and snow in the range of 5 to 75,000 m (16.4 to 246,063 ft). It combines a high specification with a very competitive price. The CS120A is ideal for stand-alone applications or in combination with automatic weather stations in road, aviation, solar-energy, and wind-energy environments. For aviation... Learn More


LoggerNet Mobile Connect Apps for iOS and Android

Current Version for iOS: 1.3 Current Version for Android: 1.3.3 LoggerNet Mobile Connect is a simple, yet powerful, tool that allows communication with any station in your LoggerNet network using an iOS or Android device. It gives you access to the LoggerNet server anywhere your mobile device has a data connection.  LoggerNet Mobile Connect Mobile Apps are free and available through the Apple Store or Google Play. Learn More


LI190R-L Quantum Sensor

The LI190R, manufactured by LI-COR, is a quantum sensor that accurately monitors Photosynthetic Photon Flux Density (PPFD) in both natural and artificial light. It connects directly to our dataloggers and is ideal for growth chambers and greenhouses.  Learn More


CDM-A108 8-Channel 5 V Analog Input Module

The CDM-A108 is an analog input module that allows easy expansion of Campbell Scientific datalogging systems. The CDM-A108 features a 24-bit, analog-to-digital converter and a low-noise, analog front-end to provide superior analog measurements. This module also supports period average measurements and includes both current and voltage excitation channels. The CDM-A108 has eight differential input and two excitation channels. It provides a 12 V and a switched... Learn More


SOLAR800 Solar-Resource Assessment Station

The Solar800 is a turn-key, solar-measurement data-acquisition system specifically designed for solar-resource assessment. The Solar800 provides the on-site data essential for a thorough understanding of a project site’s solar resources and variability. The system is designed with fast-to-field features that simplify and expedite installation: no system coding required, quick-deploy installation components and guide, and simple-to-configure software. Data retrieval is easy and flexible. Options include: FTP,... Learn More


HS2P HydroSense II Display with Insertion Pole

The HS2P is a combination of the Hydrosense II soil-water sensor with a strong handle and pole that make it easier to insert the probes into the soil. The lightweight pole allows soil testing without bending over. The HS2P is compact and portable, with the layout of the buttons on the display allowing for operation with one hand. Two different probe lengths are available, for... Learn More


RAD06 6-Plate Solar Radiation Shield

The RAD06 uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. It also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2m/s (~4.5 mph)), providing a better measurement. Note: In the image, the RAD06 is mounted to a crossarm with a thermistor. Learn More


CDM-A116 16-Channel 5 V Analog Input Module

The CDM-A116 is an analog input module that allows easy expansion of Campbell Scientific datalogging systems. The CDM-A116 features a 24-bit, analog-to-digital converter and a low-noise, analog front-end to provide superior analog measurements. This module also supports period average measurements and includes both current and voltage excitation channels. The CDM-A116 has 16 differential inputs, four excitation channels, two 12 V ports, two switched 12 V ports,... Learn More


CS225-L SDI-12 Temperature Sensor String

The CS225-L Temperature String is a prime example of our commitment to provide the highest quality monitoring products in the world. Our revamped design, rigorous validation process, and stringent quality standards are all focused on providing the fantastic quality you require to reliably generate data you can trust, even in the harshest of environments. Learn more about the CS225-L's quality testing and validation process.  The CS225-L temperature string... Learn More


TGA200A Trace Gas Analyzer

The TGA200A Trace Gas Analyzer measures trace gas concentrations in an air sample using tunable-diode laser absorption spectroscopy (TDLAS). This technique provides high sensitivity, speed, and selectivity. Its simple design allows it to measure one of many gases by choosing an appropriate laser source. The TGA200A features a 1.5 m single-pass optical measurement system that uses a thermoelectrically cooled laser.  The TGA200A is housed in a rugged environmental... Learn More


NL201 Network Link Interface

The NL201 is a serial-to-Ethernet interface that provides a wired Ethernet network connection to dataloggers, peripherals, and other serial devices. The NL201 supports sophisticated networking capabilities for PakBus devices and networks. Using a unique technique to bridge the Ethernet and CS I/O ports, the NL201 can provide direct access to the integrated IP functionality of some Campbell Scientific dataloggers. The NL201 can also act as... Learn More


CS230-L SDI-12 Temperature Profiler

The CS230 temperature profiler uses SDI-12 digital technology for simple integration. SDI-12 does away with analog measurement inaccuracies and susceptibility to electrical noise. The CS230 consists of a rigid probe assembly and up to four optional external temperature probes. The rigid probe assembly maintains the precise position of the temperature points within the profile, while protecting the temperature sensors in all mediums for the long-term. The CS230... Learn More


CRS451V Stainless-Steel Vented Water-Level Recording Sensor

The CRS451V consists of a submersible water-level and water-temperature sensor with its own time clock and memory to store the collected data—in a compact stainless-steel case. This datalogging capability frees users to place the sensor in remote sites and let it collect data for long periods. HydroSci software is included and elegantly supports test setup, data retrieval, and data display. Long battery life and rugged... Learn More


OBS501 Smart Turbidity Meter with Antifouling Features

The OBS501 features dual backscatter and sidescatter sensors, a shutter mechanism that keeps the lenses clean, and a refillable biocide chamber that prevents fouling–just like the OBS500. In addition, the OBS501 has improved performance in heavy sediment load environments. ClearSensor®  and OBS® are registered trademarks of Campbell Scientific. The OBS501 is constructed to prevent sand grains or packed sediment from getting wedged between the shutter and sensor... Learn More


CRS456V Titanium Vented Water-Level Recording Sensor

The CRS456V consists of a submersible water-level and water-temperature sensor with its own time clock and memory to store the collected data—in a compact titanium case. This datalogging capability frees users to place the sensor in remote sites and let it collect data for long periods. HydroSci software is included and elegantly supports test setup, data retrieval, and data display. Long battery life and rugged construction... Learn More


RV50 Industrial 4G LTE Cellular Gateway

The RV50 is an industrial 4G LTE cellular gateway that provides serial and Ethernet connectivity to numerous cellular networks. The RV50 is capable of LTE, CDMA/EV-DO, and GSM/GPRS/EDGE/WCDMA networking and is carrier-approved in North America for Verizon, AT&T, T-Mobile USA, Rogers, Bell, and Telus. The networking and carrier used by the RV50 is determined by the active SIM card(s) inserted into the device. The RV50... Learn More


SHM 30 Snow Depth Sensor (made by Jenoptik)

The SHM 30 snow depth sensor reliably determines snow depths of up to 10 meters within seconds and with millimeter precision. Based on an opto-electronic distance sensor emitting visible eye-safe laser light, the SHM 30 allows probing distances of up to 30 meters to detect the surface level. Even if the measuring process is impaired by precipitation, the SHM 30 reliably finds the snow surface... Learn More


SP-230-L Heated Pyranometer

The SP230-L pyranometer, manufactured by Apogee, includes a 0.18 W internal heater and an elevated base that allow it to provide solar radiation measurements during the most severe weather. Its small heater draws just 15 mA of current, allowing it to be powered by a small solar panel and battery─even on days with a short duration of daylight and at high latitudes (far away from the equator). Note: In the... Learn More


31022 Zero Air Generator

The Zero Air Generator is a low-cost, handheld source of zero air (air that has been scrubbed of CO2 and water vapor) to be used for zeroing infrared gas analyzers (IRGAs). The 31022 consists of a small pump and a molecular sieve. The pump is powered by 2 AA batteries. A “Test” port located on the 31022 can be used to determine when to replace... Learn More


HL4 Hydrolab Multiparameter Water Quality Sonde

The Hydrolab HL4 is the next generation multiparameter water quality sonde from OTT Hydromet. Its reliability, ease-of-use, and metadata produce water quality data you can trust. Know the sonde is working correctly and troubleshoot quickly with the self-monitoring system that reports the status of the sonde, shows the user where potential problems are, and gives assistance on how to solve issues. Calibration is made easier with... Learn More


NL121 Ethernet Interface

The NL121 is the easiest and lowest-cost way to add an Ethernet interface connection to a CR1000 or CR3000. This small device, about the size of a deck of cards, simply plugs onto the datalogger’s peripheral port. Through the NL121, the Internet capabilities of the datalogger can be accessed, such as PakBus, Modbus, and DNP3 over TCP, as well as Web, email, file transfer, and cloud-based... Learn More


NL116 Ethernet Interface and CompactFlash Module

Ethernet connectivity and expanded data storage capacity are easily added to a CR1000 or CR3000 by attaching an NL116. The Ethernet connection provides access to the powerful Internet capabilities of the datalogger for data collection and control. Additionally, gigabytes of data and file storage capacity can be added to the datalogger using a removable CompactFlash card. Learn More


CR6 Measurement and Control Data Logger

The CR6 measurement and control data logger is a powerful core component for your data-acquisition system. We combined the best features of all our data loggers and added faster communication, low power requirements, built in USB, compact size, and improved analog input accuracy and resolution. The CR6 also introduces our new universal (U) terminal, an ingenious way to allow virtually any sensor—analog, digital, or smart—to... Learn More


CVF4-L Ventilation Unit for Pyranometers

The CVF4-L, manufactured by Kipp & Zonen, is a ventilator/heater for our CMP6, CMP11, and CMP21 pyranometers. The ventilation unit improves the reliability and accuracy of the measurement by reducing dust, raindrops, and dew on the dome. The integrated heater can be used to disperse precipitation and melt frost, or even melt snow and ice in cold climates. Learn More


PVS4100D-CSA AC-Powered Portable Discrete Water Sampler

The PVS4100D is a deluxe ac-powered only water sampler that deposits its water samples into 24 containers. It uses a bigger sampler pump, allowing it to support the fastest sampling rates and longest sampling distances. The PVS4100D includes a programmable controller with 16-key intuitive touch pad. The controller can accept a pulse input (e.g., rain gage), a 4 to 20 mA signal (e.g., flow meter),... Learn More


CDM-VW300 2-Channel Dynamic Vibrating-Wire Analyzer

The CDM-VW300 is a 2-channel interface between sensors and dataloggers that allows shorter intervals between measurements. This interface uses an excitation mechanism that maintains the vibrating-wire sensor in a continuously vibrating state. The interface measures the resonant frequency of the wire between excitations using the patented vibrating-wire spectral-analysis technolgy (VSPECT™). VSPECT provides very fine measurement resolution and also limits the influence of external noise by... Learn More


LoggerLink Mobile Apps for iOS and Android

Current Version for iOS: 1.5 Current Version for Android: 1.5 LoggerLink Mobile Apps are simple yet powerful tools that allow an iOS or Android device to communicate with our CR200X, CR800, CR850, CR1000, CR1000X, CR3000, CR6, or CR300 data loggers via an IP device (NL115, NL116, NL120, NL121, NL201, NL240, RavenXTV, RavenXTG, RV50). LoggerLink for Android also supports Bluetooth communication for these same data loggers using an RS-232-Bluetooth... Learn More


IRGASON Integrated CO2 and H2O Open-Path Gas Analyzer and 3-D Sonic Anemometer

Campbell Scientific’s IRGASON fully integrates the open-path analyzer and sonic anemometer. Designed specifically for eddy-covariance flux measurements, the patented design is easier to install and use than separate sensors and provides increased measurement accuracy. The IRGASON simultaneously measures absolute carbon dioxide and water vapor, air temperature, barometric pressure, three-dimensional wind speed, and sonic air temperature. U.S. patent D680455 For more information about the benefits of having a... Learn More


NL200-CSA Network Link Interface

Campbell Scientific's NL200 is a powerful network link interface that provides a wired Ethernet network connection to data loggers and peripherals. It allows our data loggers, as well as other serial devices, to communicate over a local area network or a dedicated Internet connection. Additionally, the NL200 supports sophisticated networking capabilities, especially when used in PakBus networks with PakBus devices. For example, with the NL200,... Learn More


HC2S3-L Temperature and Relative Humidity Probe

The HC2S3, manufactured by Rotronic, is a rugged, accurate temperature and humidity probe that is ideal for long-term, unattended applications. The probe uses an advanced capacitive sensor to measure relative humidity. The probe includes a filter to protect the sensor from dust and particles, for superior performance and reliability. Learn More


CRS451 Stainless-Steel Water-Level Recording Sensor

The CRS451 consists of a water-level and water-temperature sensor that has its own time clock and memory to store the collected data, in a compact stainless-steel case. This frees users to place the sensor in remote sites and let it collect data for long periods. The sensor can then be retrieved, connected to a PC via a micro-USB port, and the data transferred to the... Learn More


EC150 CO2/H2O Open-Path Gas Analyzer

Campbell Scientific’s EC150 is an open-path analyzer specifically designed for eddy-covariance flux measurements. As a stand-alone analyzer, it simultaneously measures absolute carbon-dioxide and water-vapor densities, air temperature, and barometric pressure. With the optional CSAT3A sonic anemometer head, the EC150 also measures three-dimensional wind speed and sonic air temperature. Learn More


CRS456 Titanium Water-Level Recording Sensor

The CRS456 consists of a water-level and water-temperature sensor that has its own time clock and memory to store the collected data, in a compact titanium case. This frees users to place the sensor in remote sites and let it collect data for long periods. The sensor can then be retrieved, connected to a PC via a micro-USB port, and the data transferred to the... Learn More


CS120 Atmospheric Visibility Sensor

The CS120 uses tried-and-tested, infrared forward-scatter technology, and uses the proven 42° scatter angle to report meteorological observable range (MOR) for fog and snow in the range 10 to 30,000 m. It combines a high specification with a very competitive price. The CS120 is ideal for stand-alone applications or in combination with automatic weather stations in road, aviation, solar-energy, and wind-energy environments. Note: Campbell Scientific does... Learn More


CS451 Stainless-Steel SDI-12/RS-232 Pressure Transducer

The CS451 is a pressure transducer for water-level measurements in canals, wells, ponds, harbors, lakes, streams and tanks. It has a stainless-steel case that can be submerged in most canals, wells, ponds, lakes, and streams. The CS451 outputs either a digital SDI-12 or RS-232 signal to indicate observed pressure and temperature. This output can be read by many of our dataloggers. The CS451 replaces the CS450... Learn More


CPEC200 Closed-Path Eddy-Covariance System

The CPEC200 is a turn-key, closed-path eddy-covariance (EC) flux system for long-term monitoring of atmosphere-biosphere exchanges of carbon dioxide, water vapor, heat, and momentum. A complete system consists of a closed-path gas analyzer (EC155 closed-path gas analyzer), sonic anemometer (CSAT3A sonic anemometer), datalogger (CR3000 datalogger), and sample pump. A valve module is also available for automated zero and span. The gas analyzer’s intake design and small sample... Learn More


CC5MPX Digital Outdoor Video Camera for observation and surveillance

The Camera The CC5MPX is a high-quality, high-resolution digital network video camera specifically designed for remote outdoor observation applications. The camera consumes low power, making it ideal for outdoor observation in remote locations using a solar power battery. The camera can also operate with AC power where AC is available. It has a high-quality and very rugged environmental case that enables it's outdoor use in extremes of temperature. It is compatible... Learn More


SG000-KT Strike Guard Lightning Sensor kit

The SG000 kit includes: SG000 Strike Guard Lightning Sensor FC100 Fiber Optic Converter FC100CBL1-L Simplex PMMA Plastic Fiber Optic Cable SC932A 9-Pin to 9-Pin RS-232 Interface 16987 SC105 or SC932A Mounting kit 14291 Field Power Cable 12Vdc Plug to Pigtail, 2ft  18663 Null Modem Cable, 9-pin Male to 9-pin Male Learn More