Product Details
Restockable Yes
Warranty 1 year
Compliance RoHS Compliance Image

Common Accessories

14291 Field Power Cable, 12 Vdc Plug to Pigtail
One charger or field cable is needed per base unit or when the radio is used on a datalogger's RS-232 port. The 14291 power cable terminates in a barrel plug on one end and two pigtails on the other end.
15730 900 MHz 0 dBd1/4 Wave Omnidirectional Antenna with RPSMA Connector
The 15730 is a 900 MHz, unity gain (0 dBd), 1/4 wave whip, right-angle antenna. The 15730 is an omnidirectional antenna that attaches directly to the product (no cables). It should be used inside an enclosure or building.
COAXRPSMA-L LMR195 Antenna Cable with Reverse Polarity SMA and Type N Male Connector
The COAXRPSMA-L is an LMR195 coaxial cable fitted with a Type N Male connector on one end and a Reverse Polarity SMA (RPSMA) female connector on the other end. This cable is commonly used to connect an antenna with Type N connector to a spread-spectrum radio with an RPSMA connector.
COAXNTN-L RG8 Antenna Cable with 2 Type N Male Connectors
The COAXNTN-L consists of an RG8/U, low-loss coaxial cable fitted with a Type N Male connector on each end. It can support any 50 ohm transmission line application.
18663 Null Modem Cable, 9-Pin Male to 9-Pin Male
This 1 ft, null modem cable has 9-pin connectors on both ends for connecting the datalogger's RS-232 port to a peripheral's RS-232 port. An interface such as the SC105 or SC932A is typically not required.
10873 Serial Data Cable, 9-Pin Female to 9-Pin Male
The 10873 is a serial cable that is useful for connecting the RS-232 port of the datalogger to the 9-pin RS-232 port of a computer. It is used with DTE devices, such as a PC or NL201.

Replacement Parts

This spacer is needed if screws are used to secure the cable to the device.
SC12 Robust Input/Output Cable
The SC12 is our standard cable for connecting the datalogger's 9-pin serial I/O port to most peripherals with a 9-pin port. It is supplied with many of our standard communications peripherals. Its 9-pin male connector attaches to the datalogger's CS I/O port, and the two 9-pin female connectors can attach to peripherals or interfaces.
The 17648 is a USB cable for attaching our products to a USB port on a PC. It has a type A male connector for connecting to the PC's USB port and a type B connector for connecting to the Campbell Scientific device.
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.