Basic Weather Sensors / MetSENS600
MetSENS600
 
MetSENS600 Compact Weather Sensor for Temperature, RH, Barometric Pressure, Wind, and Precipitation
 
Communication Options - show details
-D2 -D2 RS-232 Digital Output
The maximum cable length is 6m. When ordering the -D2 option, the -50 and -100 options are not orderable.
-DM -DM RS-485 Modbus Output
-DS -DS SDI-12 Digital Output
The maximum cable length is 90m.
Cable Length Options
-17 -17 w/5m per sensor
-50 -50 w/15m per sensor
-150 -150 w/45m per sensor
-U -U w/User Defined Length
-U User Specified Length - show details
-L m cable per probe

Allowed values: 5-900 m, increments of 5 m

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector

Add to your Quote List


Product Details
Restockable Yes
Warranty 2 years
Compliance CE Compliance Image RoHS Compliance Image

Common Accessories

17387
 
One mounting kit is needed per sensor. This mount includes a 17386 Mounting Tube, a right-angle bracket, two U-bolts, and four nuts.
34344
 
The 34344 is a mounting kit for the MetSENS series of compact weather sensors. The kit can be installed on a vertical pipe or mast, or on a horizontal crossarm less than 6.35 cm (2.5 in.) in diameter. The kit includes a mounting stand and three pan truss screws, which are used to attach the following: the MetSENS sensor; two 5/16 x 3.0 in. carriage screws; and two sets of wing nuts, washers, and lock washers.

Other Accessories

31897
 
31897 RJ45 Male to Terminal Dongle Data Cable
 
The 31897 can be plugged into the RJ45 RS-232 port on a CR6 or CR1000X datalogger to connect the datalogger to an RS-232 sensor.

Replacement Parts

MetSENSCBL1
 
MetSENSCBL1 MetSENS SDI-12 Replacement Cable
 
This cable connects a MetSENS compact weather sensor with SDI-12 output to the datalogger. The MetSENSCBL1 consists of a 22 AWG cable with a pinned military-style connector and high-temperature, high-voltage, UV-resistant PVC insulation.
MetSENSCBL2
 
This cable connects a MetSENS compact weather sensor with RS-485 Modbus output to the datalogger. The MetSENSCBL2 consists of a 22 AWG cable with a pinned military-style connector and high-temperature, high-voltage, UV-resistant PVC insulation.
MetSENSCBL3
 
This cable connects a MetSENS compact weather sensor with RS-232 output to the datalogger. The MetSENSCBL3 consists of a 22 AWG cable with a pinned military-style connector and high-temperature, high-voltage, UV-resistant PVC insulation.

Services

Campbell Scientific can change the communications configuration of the sensors or download new OSs to the units. Users cannot do this themselves without a special cable and software, and these items are not available to the end user. To have a unit reconfigured or updated, send the unit to Campbell Scientific via an RMA (Returned Material Authorization).