ClimaVUE50
ClimaVUE50
 
ClimaVUE50 Compact Digital Weather Sensor
 
Cable Length Options
-10 -10 w/3m per sensor
-17 -17 w/5m per sensor
-33 -33 w/10m per sensor
-50 -50 w/15m per sensor
-U -U w/User Defined Length
-U User Specified Length - show details
-L m cable per sensor

Allowed values: 20-300 m, increments of 5 m
Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
How to Order Shipping Information

Add to your Quote List


Product Details
Restockable Yes
Warranty 1 year
Compliance –

Common Accessories

17387
17387 ClimaVUE50, MetSENS or WindSonic Mounting Pipe Kit
 
show details
The 17387 is used to mount a ClimaVUE™50 to a crossarm. This mount includes a 17386 Mounting Tube, a right-angle bracket, two U-bolts, and four nuts.
CM300
CM300
 
CM300 23 in. Mounting Pole with Cap
 
show details
If you are not mounting the ClimaVUE™50 to a crossarm, tripod, or tower, there are three mounting pole options. The CM300 is one of these options. The CM300 is a 58 cm (23 in.), stainless-steel, 1.5 in. IPS vertical pole. It is designed for mounting sensors, enclosures, or other instruments, and is an ideal mount for remote sensors.
Pedestal Options - show details
-NP -NP No Pedestal Base
Select this if you are embedding the pole directly in a concrete foundation or supplying your own method for supporting the pole.
-PJ -PJ Pedestal J-Bolt Kit
Select this option to attach the pole onto a concrete foundation using j-bolts. With this kit, customers can more easily control the pole's placement ensuring that the pole remains in a vertical position.
-PS -PS Pedestal Short Legs
Pedestal Short Leg Kit includes three 23-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). This pedestal kit is adequate for many temporary installations and for many situations where it is impractical to use a concrete foundation.
-PL -PL Pedestal Long Legs
The long leg option includes three 39-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). The long leg kit provides more stability for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
35048
35048 Bird Spike Kit for ClimaVUE50
 
show details
The ClimaVUE™50 Bird Spike Kit is used to discourage birds from roosting on the ClimaVUE™50 and leaving any unwanted droppings behind that could clog the rain funnel. The bird spike kit slips over the top of the ClimaVUE™50 and slides down the sides until it fits securely in place. The 35048 consists of a plastic band with spikes pointing upward. The spikes' shape and location ensure minimal interference with rain and solar measurements. The flexible spikes extend 10.16 cm (4 in.) above the top of the ClimaVUE™50. The spikes are designed not to hurt the birds.
CM305
CM305
 
CM305 47 in. Mounting Pole with Cap
 
show details
If you are not mounting the ClimaVUE™50 to a crossarm, tripod, or tower, there are three mounting pole options. The CM305 is one of these options. The CM305 is a 119 cm (47 in.), stainless-steel, 1.5-in. IPS vertical pole. It is designed for mounting sensors, enclosures, or other instruments, and is an ideal mount for remote sensors.
Pedestal Options - show details
-NP -NP No Pedestal Base
Select this if you are embedding the pole directly in a concrete foundation or supplying your own method for supporting the pole.
-PJ -PJ Pedestal J-Bolt Kit
Select this option to attach the pole onto a concrete foundation using j-bolts. With this kit, customers can more easily control the pole's placement ensuring that the pole remains in a vertical position.
-PS -PS Pedestal Short Legs
Pedestal Short Leg Kit includes three 23-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). This pedestal kit is adequate for many temporary installations and for many situations where it is impractical to use a concrete foundation.
-PL -PL Pedestal Long Legs
The long leg option includes three 39-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). The long leg kit provides more stability for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
CM310
CM310
 
CM310 56 in. Mounting Pole with Cap
 
show details
If you are not mounting the ClimaVUE™50 to a crossarm, tripod, or tower, there are three mounting pole options. The CM310 is one of these options. The CM310 is a 142 cm (56 in.), stainless-steel, 1.5-in. IPS vertical pole. It is designed for mounting sensors, enclosures, or other instruments, and is an ideal mount for remote sensors.
Pedestal Options - show details
-NP -NP No Pedestal Base
Select this if you are embedding the pole directly in a concrete foundation or supplying your own method for supporting the pole.
-PJ -PJ Pedestal J-Bolt Kit
Select this option to attach the pole onto a concrete foundation using j-bolts. With this kit, customers can more easily control the pole's placement ensuring that the pole remains in a vertical position.
-PS -PS Pedestal Short Legs
Pedestal Short Leg Kit includes three 23-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). This pedestal kit is adequate for many temporary installations and for many situations where it is impractical to use a concrete foundation.
-PL -PL Pedestal Long Legs
The long leg option includes three 39-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). The long leg kit provides more stability for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.

Replacement Parts

ClimaVUE50CBL
ClimaVUE50CBL
 
ClimaVUE50CBL Replacement Cable for ClimaVUE 50
 
show details
The cable consists of three shielded conductors (24 AWG) insulated in polypropylene with a drain wire. The cable jacket is composed of black UV-resistant polyurethane. The ClimaVUE50CBL has an IP-67 rated M12 connector with stainless-steel knurl to resist corrosion in coastal and other harsh environments. The cable can be terminated with either stripped and tinned wires or fitted with a connector for our prewired enclosures.
Cable Length Options
-10 -10 w/3m per cable
-17 -17 w/5m per cable
-33 -33 w/10m per cable
-50 -50 w/15m per cable
-U -U w/User Defined Length
-U User Specified Length - show details
-L m per cable

Allowed values: 1-300 m, increments of 1 m
Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
34475
34475 Replacement Precipitation Funnel for ClimaVUE50
 
show details
Part number 34475 is a replacement precipitation funnel for the ClimaVUE™50. This funnel also includes a calibrated pyranometer.  
34477
34477 Replacement Precipitation Filter Spring for ClimaVUE 50
 
show details
Part number 34477 is a replacement precipitation filter spring for the ClimaVUE™50.
34476
34476 Replacement RH and Barometer Sensor with Cover for ClimaVUE50
 
show details
Part number 34476 is a replacement relative humidity (RH) and barometer sensor with cover for the ClimaVUE™50.
34136 5/16-18 x 2.0 Stainless-Steel V-Bolt with 2 Silicon Bronze Nuts
 
show details
The 34136 replacement stainless-steel V-bolt with silicon bronze nuts is used to mount the ClimaVUE™50 to a vertical mast. The 34136 may be ordered to replace the original if it was damaged or lost.
18126
18126 5/16-18 Silicon Bronze Nut
 
show details
This 5/16" nut can be purchased to replace a lost or damaged nut.
4365
4365 Stainless-Steel Flat Washer 5/16
 
show details
This flat 5/16" washer can be purchased to replace a lost or damaged washer.
4366
4366 Stainless-Steel Lock Washer 5/16
 
show details
This lock washer may be purchased to replace a lost or damaged washer.
34001
34001 Red Plastic Cap for M12 Connector
 
show details
This red plastic cap protects the M12 connector for the ClimaVUE™50 or SoilVUE™10 during shipping and extended storage.

Services

Users cannot update the firmware on their own. They must send the units to Campbell Scientific via an RMA (Returned Material Authorization) to have the firmware updated using a special cable and software.