Pyranometers / SPLITE2
SPLITE2 Kipp & Zonen Silicon Pyranometer
For routine measurement of global solar radiation
weather applications water applications energy applications gas flux and turbulence applications infrastructure applications soil applications

Overview

SP LITE2 can be used under all weather conditions. The sensor measures the solar energy received from the entire hemisphere. It is ideal for measuring available energy for use in solar energy applications, plant growth, thermal convection and evapotranspiration.


Read More

Images


Detailed Description

SP LITE2 uses a photodiode detector, which creates a voltage output that is proportional to the incoming radiation. Also due to the unique design of the diffuser, its sensitivity is proportional to the cosine of the angle of incidence of the incoming radiation, allowing for accurate and consistent measurements.

SP LITE2 is easy to use. It can be directly connected to voltmeter or data logger. Direct readout in Watts per square meter (W/m²) can be derived from the measured voltage divided by the calibration coefficient. It is fitted with the Kipp & Zonen high quality yellow cable.

SP LITE2 features adjustment screws and a bubble level integrated in the mounting flange for your convenience. A threaded hole in the body of the housing takes our accessory screw-in mounting rod. Two instruments can easily be bolted back-to-back amd fitted with a mounting rod to make a simple albedometer.


Specifications

  • Spectral range: 400 to 1100 nm 
  • Sensitivity: 60 to 100 (option, 10 ± 0.5) µV/W/m² 
  • Response time SP LITE2 (95%): < 500 ns 
  • Directional error (up to 80 ° with 1000 W/m² beam): < 5 W/m² 
  • Temperature dependence: < -0.15 %/ ºC 
  • Operating temperature range: -40°C to +80°C 
  • Maximum solar irradiance: 2000 W/m² 
  • Field of view: 180 °
  • Cable length: 16ft standard (user specified optional)
  • Warranty: 2 years

Compatibility

Mounting

The SPLITE2 includes a bubble level and adjusting leveling screws, which allow the sensor to be leveled without using a leveling base. The 015 Mounting Arm can be used to mount the sensor to a mast or the CM225 Solar Sensor Mounting Stand can be used to attach the sensor to a mast, crossarm, or pole (1.0-in. to 2.1-in. outer diameter). The CM225 consists of rectangular plate, mounting bracket, U-bolts, lock washers, and nuts.

Alternatively, the CM245 Adjustable Angle Mounting Stand may be used. It includes slots that can be adjusted to any angle from horizontal to vertical.

Data Logger Considerations

Compatible Contemporary Data Loggers

CR200(X) Series CR800/CR850 CR1000 CR3000 CR5000 CR7X CR9000X

Compatible Retired Data Loggers

CR500 CR510 CR10 CR10X 21X CR23X CR9000



Privacy Policy Update

We've updated our privacy policy.  Learn More