FAQs Frequently asked questions about our products and solutions

Which radiation shield model should be used with the HC2S3-L?

To measure ambient temperature and relative humidity (RH), mount the HC2S3-L probe inside a 41003-5 or 41003-5A 10-Plate Radiation Shield. The 27731 hex plug is shipped with the HC2S3-L so that it can be used with older 10-plate radiation shield models. The 6-plate radiation shield (pn 41303-5A) cannot be used with the HC2S3-L.

This was helpful

FAQs Home

Similar FAQs

What might cause LoggerNet to display a “PakBus Framing Error” message such as "PakBusPort","F","PakBus framing error","Invalid low level signature"?
What is needed to connect a modem to a data logger?
What type of field check can be done on a temperature sensor or a temperature and relative humidity sensor to determine if it is within the range of specified accuracy or if it requires calibration?
Which filter tip should be used with the HC2S3-L?
What do “serial port open failed” and “permission denied” error messages mean?
What is the most basic, least expensive software that can be used to view and display data from Campbell Scientific data loggers?
Using a CR800 or CR850 with a Wi-Fi adapter positioned near a Wi-Fi network hotspot, could a distant PC running LoggerNet collect the data logger data (or could the data logger send the data to the PC)?