FAQs Frequently asked questions about our products and solutions

What needs to be done to get a CR3000 program to run on a CR9000 or CR9000X?

The CR3000 program will have to be modified so that each measurement or control instruction includes the appropriate module number. Some parameters might differ as well.

This was helpful

FAQs Home

Similar FAQs

What is the default TCP/IP port that LoggerNet uses to communicate with PakBus data loggers?
What equipment is needed to link data loggers to a LoggerLink application?
Can Short Cut be used to make a CR1000 or CR3000 with an NL120 push data to an FTP?
Can an SP20 or SP20-PW solar panel be put in series to produce 40 W at peak output, similar to how the SP50-L can produce 100 W?
Can Campbell Scientific data loggers be used with a telemetry system to remotely download data, check parameters, etc.?
Can the CR800, CR850, CR1000, or CR3000 upload to an FTP site on scheduled intervals?
If the cable attached to a sensor is too short, can more cable be spliced to the existing cable to make it longer?