FAQs Frequently asked questions about our products and solutions

Are there any mounting options for the CSAT3A, CSAT3AH, CSAT3B, or CSAT3BH that lend themselves to frequent repositioning?

Campbell Scientific does not offer any mounting booms or hardware that enable easy and frequent positioning of the sonic anemometer sensor head. This type of hardware must be provided by the user.

This was helpful

FAQs Home

Similar FAQs

Is the CSAT3A, CSAT3AH, CSAT3B, or CSAT3BH well suited for all environments?
Are there any corrections to the raw data (not the average data) obtained by the CSAT3/3A/3AH?
If the temperature drops below -30°C, is that a problem for a CSAT3A or CSAT3B?
Is there a way to convert an Edlog program file to a CRBasic program file?
Can a display be put on the outside of an enclosure?
Can two different communications paths to one data logger be set up in LoggerNet?
If a computer does not have any serial ports, how can software (such as LoggerNet, PC400, PC200W, or Device Configuration Utility) talk to the data logger?