CR800 Series

Rugged & Reliable Data Logger

The CR800 series data logger is a smaller version of our CR1000 logger. The CR800 logger is the ideal alternative for measurements requiring a limited number of sensors, yet can be used with most of our communication devices.

Reduced channel numbers make the CR800 data logger series suited for small to medium sized applications although they can be used for large scale applications using our range of expansion peripherals.

An optional built in display is also available with our CR850 model logger, allowing the user to view current and stored values, on-site program-editing and sensor calibration. The CR800 data logger can provide the same functions when used in conjunction with our CR1000KD keyboard display.

 

 

 


Features

  • Ideal datalogger where only a few sensors will be measured
  • Can be used in large scale networks with added expansion peripherals
  • Stores 4 MBs of data in FLASH memory
  • Optional inbuilt display model available (CR850)
  • Data format is table
  • Operating system: PakBus® Software support offered in LoggerNet or PC400 (full-featured) or ShortCut (programming) Detachable keyboard/display, the CR1000KD, can be carried to multiple stations
  • Supports Modbus protocol, SDI-12 protocol, and SDM devices

Specifications

  • Current Drain: ˜0.6 mA (sleep mode), 1 to 16 mA (w/o RS-232 communications), 17 to 28 mA (w/RS-232 communications)
  • A/D Bits: 13
  • Scan Rate: 100 Hz
  • Analog Inputs: 6 single-ended (3 differential), individually configured
  • Analog Voltage Range: ±5000 mV
  • Analog Voltage Accuracy: ±(0.06% of reading + offset), 0° to 40°C
  • Measurement Resolution: 0.33 µV
  • Switched Excitations: 2 voltage
  • Pulse Counters: 2
  • Control/Digital Ports: 4
  • Memory: 2 MB Flash (operating system), 4 MB (CPU usage, program storage, and data storage)
  • Communication Ports: 1 RS-232, 1 CS I/O
  • Protocols Supported: PakBus, Modbus, DNP3, FTP, HTTP, XML, POP3, SMTP, Telnet, NTCIP, NTP, SDI-12, SDM
  • Warranty: 3 years